Plastic Numbers Pet Bottle Manufacturers

Plastic Bottle Suppliers, Custom Pet Bottles, Pet Bottles suppliers.

Do not need frequent replacement due to high temperatures caused by the aging of the hose.

4. As the hot filling is a high level or full bottle filling, the bottle is to be transported in an ordinary transport gas bottles and PET bottles different, with card bottle conveying technology, to avoid the traditional
Star wheel dial PET bottle to bottle and squeeze bottle material cause spillover phenomenon.

5. PET bottle cleaning and disinfection system

(1) Before the infeed screw equipped with a red bottle sterilizing apparatus, rinse with disinfectant bottle.
(2) washer rinse bottle wall, irrigation and disinfection with disinfectant or sterile water. (3) on the intake rinser star wheel and into the capping machine star wheel are provided with the bottle washing device, one of the threaded portion of the bottle sterilization, the second is the threaded portion of the bottle clean materials, substance over a period of time after the threaded portion of the bottle cap to avoid mildew affecting drinks
The amount.
6. The control valves are sanitary type pneumatic valves, pipes are made of high-quality polished stainless steel inside and outside 0Cr19Ni9 sanitary pipe, smooth inside and outside surface of the pipe roughness Ra≤0.8. Conduit pipe should be no dead ends, no "bag", set the necessary discharges or sampling port, minimizing material
Material remaining in the pipes and valves to facilitate CIP cleaning.

7. Secondary filling technology

When the PET bottle into the filling machine for the device, with the rise of the cam, PET bottle and filling valve gasket contacts, and open the top of the valve sleeve, while the cylinder valve opening action, outer lever to open the upper part of the rotary valve filling valve, start filling first; when the material arrives at the lower end of the valve casing,

Made by: http://www.plastic-bottle-manufacturers.com