Plastic Food Containers

Plastic Bottle Manufacturers, Custom Pet Bottles, Pet Bottles suppliers.
Made by: http://www.plastic-bottle-manufacturers.com
PET debris generally preclude the use of centrifugal dewatering machine so debris moisture content to 2%, and then by a belt or tube dryer to a moisture content is reduced to 0.5%. German Krones company successfully developed high-quality PET plastic bottle recycling system, the processing capacity of up to 15,000 tons PET bottles, the PET raw material can be directly processed into other PET container production, production costs are significantly reduced.
PET plastic bottle recycling system to eliminate the use of chemical coating technology to burn alkali chemical coating removing agent to remove surface adhesion PET plastic bottles contaminants can achieve any kind of PET plastic bottles for recycling. After the technical processing of recycled products, not only the production of preforms can be mixed directly, at the same time, recycled products due to low levels of acetaldehyde and yellow pigment, but also to meet the requirements of purity and quality, especially for food and beverage industry products Packaging costs 20% -30% lower than the average of new materials.
Pet plastic bottle Characteristics
Polyethylene terephthalate is a thermoplastic polyester in the most important species, the English called Polythylene terephthalate referred to as PET or PETP (hereinafter otherwise known as PET), commonly known as polyester resin. It is terephthalic acid and ethylene glycol polycondensate, and together referred to as PBT thermoplastic polyester, or polyester. PET is a milky white or former yellow highly crystalline polymers, the surface smooth and shiny.
Creep resistance, fatigue resistance, abrasion and good dimensional stability, wear small, high hardness, the largest thermoplastic toughness; electrical insulation properties, little affected by temperature, but poor resistance to corona. Non-toxic, weather resistance and good resistance to chemical stability, low water absorption, resistance to weak acids and organic solvents.
PET bottle hot filling machine design